%SEARCH{...}%
is a table consisting of topic names and topic summaries. Use the format="..."
parameter to customize the search result. The format parameter typically defines a bullet or a table row containing macros, such as %SEARCH{ "food" format="| $topic | $summary |" }%
. See %SEARCH{...}%
for other search parameters, such as separator=""
.
header="..."
parameter header="| *Topic:* | *Summary:* |"Format tokens that can be used in the header string:
Name: | Expands To: |
---|---|
$web |
Name of the web |
$ntopics |
Number of topics found in current web. Will be 0 (zero). |
$nhits |
Number of hits if multiple="on" . Will be 0 (zero). |
$pager |
pager control - can be optionally customised using the pagerformat below |
$n or $n() |
New line. Use $n() if followed by alphanumeric character, e.g. write Foo$n()Bar instead of Foo$nBar Most macros accept parameter strings which are split over multiple lines. This is usually more readable than using Note that newline is not a line break. The browser will wrap the lines together. If you require a line break, displaying the results on two lines, use |
$nop or $nop() |
Is a "no operation". This token gets removed; useful for nested search |
$quot |
Double quote (" ) (\" also works) |
$percent |
Percent sign (% ) ($percnt also works) |
$dollar |
Dollar sign ($ ) |
$lt |
Less than sign (< ) |
$gt |
Greater than sign (> ) |
$amp |
Ampersand (& ) |
$comma |
Comma (, ) |
footer="..."
parameter footer="| *Total:* | *$nhits* |"Format tokens that can be used in the footer string:
Name: | Expands To: |
---|---|
$web |
Name of the web |
$ntopics |
Number of topics found in current web |
$nhits |
Number of hits if multiple="on" . Cumulative across all topics in current web. Identical to $ntopics unless multiple="on" |
$pager |
pager control - can be optionally customised using the pagerformat below |
$n or $n() |
New line. Use $n() if followed by alphanumeric character, e.g. write Foo$n()Bar instead of Foo$nBar Most macros accept parameter strings which are split over multiple lines. This is usually more readable than using Note that newline is not a line break. The browser will wrap the lines together. If you require a line break, displaying the results on two lines, use |
$nop or $nop() |
Is a "no operation". This token gets removed; useful for nested search |
$quot |
Double quote (" ) (\" also works) |
$percent |
Percent sign (% ) ($percnt also works) |
$dollar |
Dollar sign ($ ) |
$lt |
Less than sign (< ) |
$gt |
Greater than sign (> ) |
$amp |
Ampersand (& ) |
$comma |
Comma (, ) |
pagerformat="..."
parameter pagerformat="Page $currentpage of $numberofpages [[$nexturl][next page]]"Format tokens that can be used in the pagerformat string:
Name: | Expands To: |
---|---|
$previouspage |
The page number before the currently displayed one |
$currentpage |
The currently displayed page number |
$nextpage |
The page number after the currently displayed one |
$numberofpages |
Total number of pages there are results for |
$pagesize |
The number of results per page |
$previousurl |
full URL to the previous page - IF using the built in pager system |
$nexturl |
full URL to the previous page - IF using the built in pager system |
$previousbutton |
skin template (SEARCH:pager_previous) html for the full URL to the previous page - IF using the built in pager system |
$nextbutton |
skin template (SEARCH:pager_next) html for the full URL to the previous page - IF using the built in pager system |
$n or $n() |
New line. Use $n() if followed by alphanumeric character, e.g. write Foo$n()Bar instead of Foo$nBar Most macros accept parameter strings which are split over multiple lines. This is usually more readable than using Note that newline is not a line break. The browser will wrap the lines together. If you require a line break, displaying the results on two lines, use |
$nop or $nop() |
Is a "no operation". This token gets removed; useful for nested search |
$quot |
Double quote (" ) (\" also works) |
$percent |
Percent sign (% ) ($percnt also works) |
$dollar |
Dollar sign ($ ) |
$lt |
Less than sign (< ) |
$gt |
Greater than sign (> ) |
$amp |
Ampersand (& ) |
$comma |
Comma (, ) |
format="..."
parameter format="| $topic | $summary |"Format tokens that can be used in the format string:
Name: | Expands To: |
---|---|
$web |
Name of the web |
$topic |
Topic name |
$topic(20) |
Topic name, "- " hyphenated every 20 characters |
$topic(30, -<br />) |
Topic name, hyphenated every 30 characters with separator "-<br />" |
$topic(40, ...) |
Topic name, shortened to 40 characters with trailing ellipsis. |
$parent |
Name of parent topic; empty if not set |
$parent(20) |
Name of parent topic, same hyphenation/shortening as $topic() |
$text |
Formatted topic text. In case of a multiple="on" search, it is the line found for each search hit. |
$locked |
LOCKED flag (if any) |
$date |
Time stamp of last topic update, e.g. 11 Oct 2024 - 13:53 |
$isodate |
Time stamp of last topic update, e.g. 2024-10-11T13:53Z |
$index |
number of total results - can be used as a running counter in the format , or in the footer . This $index is not affected by web based partitioning of results. |
$item |
the full name of a result item - in a SEARCH context, equivalent to $web.$topic |
$rev |
Number of last topic revision, e.g. 4 |
$username |
Login username of last user to update the topic, e.g. jsmith |
$wikiname |
WikiName of last user to update the topic, e.g. JohnSmith |
$wikiusername |
WikiName of last usr to update the topic, like Main.JohnSmith |
$createdate |
Time stamp of topic revision 1 |
$createusername |
Login username of topic revision 1, e.g. jsmith |
$createwikiname |
WikiName of topic revision 1, e.g. JohnSmith |
$createwikiusername |
WikiName topic link of topic revision 1, e.g. Main.JohnSmith |
$summary |
Topic summary, just the plain text, all formatting and line breaks removed; up to 162 characters |
$summary(50) |
Topic summary, up to 50 characters shown |
$summary(showvarnames) |
Topic summary, with %SOMEMACRO{...}% macros shown as SOMEMACRO{...} |
$summary(noheader) |
Topic summary, with leading ---+ headers removedNote: The tokens can be combined, for example $summary(100, showvarnames, noheader) |
$summary(searchcontext) |
Creates a topic summary with the search terms highlighted |
$summary(searchcontext, 50) |
Creates a topic summary with the search terms highlighted, up to 50 characters |
$changes |
Summary of changes between latest rev and previous rev |
$changes(n) |
Summary of changes between latest rev and rev n |
$formname |
The name of the form attached to the topic; empty if none |
$formfield(name) |
The field value of a form field; for example, if FAQWhatIsWikiWiki was a search hit, $formfield(TopicClassification) would get expanded to =. This applies only to topics that have a DataForm. For multi-line textfields new lines are replaced by the value of the =newline parameter if it is defined, otherwise by an HTML <br /> |
$formfield(name, 10) |
Form field value, "- " hyphenated every 10 characters |
$formfield(name, 20, -<br />) |
Form field value, hyphenated every 20 characters with separator "-<br />" |
$formfield(name,30,...) |
Form field value, shortened to 30 characters with trailing ellipsis. |
$formfield(name, display) |
Form field value after mapping the stored value to the display value (use with +values form fields). You can still use the hyphenation controls described above by placing them after display e.g. $formfield(name, display, 10) |
$extract(reg-exp) |
A regular expression pattern to extract some text from a topic (does not search meta data; use $formfield instead). Escapes some characters to their standard FormatTokens in the discovered text to make embedding in other macros easier. See Using $extract and $pattern below for more information. |
$pattern(reg-exp) |
As $extract , with the difference that $pattern does not escape quotes or precent signs in the result. |
$count(reg-exp) |
Count of number of times a regular expression pattern appears in the text of a topic (does not search meta data). Follows guidelines for use and limitations outlined above under $pattern(reg-exp) . Example: $count(.*?(---[+][+][+][+]) .*) counts the number of <H4> headers in a page. |
$ntopics |
Number of topics found in current web. This is the current topic count, not the total number of topics |
$nhits |
Number of hits if multiple="on" . Cumulative across all topics in current web. Identical to $ntopics unless multiple="on" |
$pager |
pager control - can be optionally customised using the pagerformat below |
$n or $n() |
New line. Use $n() if followed by alphanumeric character, e.g. write Foo$n()Bar instead of Foo$nBar Most macros accept parameter strings which are split over multiple lines. This is usually more readable than using Note that newline is not a line break. The browser will wrap the lines together. If you require a line break, displaying the results on two lines, use |
$nop or $nop() |
Is a "no operation". This token gets removed; useful for nested search |
$quot |
Double quote (" ) (\" also works) |
$percent |
Percent sign (% ) ($percnt also works) |
$dollar |
Dollar sign ($ ) |
$lt |
Less than sign (< ) |
$gt |
Greater than sign (> ) |
$amp |
Ampersand (& ) |
$comma |
Comma (, ) |
$extract
and $pattern
are subtle. These tokens specify a RegularExpression that covers the whole text (of each line found by the search if multiple="on"
, of the entire topic text otherwise). The regular expression typically starts with .*
, and must end in .*
The leading .*
matches all the content up to the start of the string you want to find. It will try to match the longest string of characters it can, so if your pattern occurs several times in the content it will always match the last occurence. If you always want to match the first occurrence, use .*?
instead.
You _must* end the pattern with .*
Put the section of the pattern that matches the text you want to keep in parenthesis, like this $extract(.*?(from here.*?to here).*)
$extract(.*?\*.*?Email\:\s*([^\n\r]+).*)
extracts the e-mail address from * Email: ...
.*
inside the parentheses, e.g. $extract(.*foo(.*)bar.*)
does not work. You can however use .*?
thus $extract(.*foo(.*?)bar.*)
Make sure that the integrity of a web page is not compromised; for example, if you include an HTML table make sure to include everything including the table end tag. $extract
will automatically escape "<>&%$
characters so that the string matched by the pattern doesn't break any macros that are wrapped around it. $pattern
does not do this, and should be used with care. $extract
is only available in Foswiki 2.0 and later.
%STARTSECTION{"example1"}% %SEARCH{ "VarREMOTE" scope="topic" nonoise="on" header="| *Topic* | *Summary* |" format="| [[$topic]] | $summary |" footer="| *Topics found* | *$ntopics* |" }% %ENDSECTION{"example1"}%Click to execute
TopicClassification
field, an OperatingSystem
field and an OsVersion
field we could write:
%STARTSECTION{"example2"}% %SEARCH{ "TopicClassification~'FrequentlyAskedQuestion'" type="query" nonoise="on" header="| *Topic:* | *Summary:* | *Related Topics:* |" format="| [[$topic]] | $formfield(TopicSummary) | $formfield(RelatedTopics) |" }% %ENDSECTION{"example2"}%Click to execute
$pattern()
token to extract the first level-1 heading for each topic:
%SEARCH{ "^---[+][^+][^\r\n]+[\r\n]" type="regex" nonoise="on" header="Headings:" limit="5" format=" * [[$topic][$pattern([\r\n\-+!]+([^\r\n]*?)[\r\n].*)]]" footer="Found $ntopics topics with level-1 headings" }%Click to execute
format
, header
and footer
parameters, among others. To make use of additional macros in the output, familiarity with inside-out, left-to-right order of expansion rules is required. There are two forms: %INNERMACRO%
to build the parameter string before %OUTERMACRO%
is expanded %OUTERMACRO{ format="%INNERMACRO%" }%
%INNERMACRO%
into the output of %OUTERMACRO%
%OUTERMACRO{ format="$percentINNERMACRO$percent" }%
$percent/$percnt
format tokens. Generally only output parameters like header
, format
and footer
support format tokens.
%MACRO1{ something="%MACRO2{ somethingelse="%MACRO3%, %MACRO4%" }%" }%The macros are expanded in this order: MACRO3, MACRO4, MACRO2, MACRO1.
%
, and escaping any "
character it uses (becomes \"
)
$percent/$percnt
format tokens. Generally only output parameters like header
, format
and footer
support format tokens.
%MACRO1{ format="$percentMACRO2{ format=\"%MACRO3%, %MACRO4%\" }$percent" }%The macros are expanded in this order: MACRO3, MACRO4, MACRO1, MACRO2.
%SEARCH{ "culture" nonoise="on" format=" * $topic is referenced by: (list all references)" }%Second (inner) search: For each hit, we want this search:
%SEARCH{ "(topic found in outer search)" nonoise="on" format="$topic" separator=", " }%Now let's nest the two.
$percent
to escape (delay) the inner search's SEARCH macro
\"
to escape the double quotes
$dollar
to escape the $
of $topic
%STARTSECTION{"example3"}% %SEARCH{ "culture" nonoise="on" limit="5" format="\ * [[$topic]] is referenced by: * $percentSEARCH{ \"$topic\" nonoise=\"on\" format=\"[[$dollartopic]]\" separator=\", \" }$percent" }% %ENDSECTION{"example3"}%Click to execute
$dollarpercentSEARCH{
for level three, $dollardollarpercentSEARCH{
for level four, etc.
$topic
, $dollartopic
or $dollardollartopic
.
If you find yourself using escaped tokens like $dollartopic
, another approach is to use the STARTSECTION/ENDSECTION feature of INCLUDE. Instead of nesting the inner search expression directly inside the format string of the outer, the inner search is written as a separate stand-alone section of a topic which is INCLUDEd into the format string of the outer.
%STARTSECTION{"example4"}% %SEARCH{ "culture" nonoise="on" limit="5" format="\ * $topic is referenced by: * $percentINCLUDE{\"%TOPIC%\" section=\"mysearch\" thetopic=\"$topic\"}$percent" }% <verbatim class="foswikiHidden"> %STARTSECTION{"mysearch"}%%SEARCH{ "%thetopic%" nonoise="on" format="$topic" separator=", " }%%ENDSECTION{"mysearch"}% </verbatim> %ENDSECTION{"example4"}%Click to execute
%STARTSECTION{"example5"}% %SEARCH{ "1" type="query" nonoise="on" order="modified" reverse="on" limit="7" header="| *Topic* | *Changed* | *By* |" format="| [[$topic]] | $date | $wikiusername |" }% %ENDSECTION{"example5"}%Click to execute
%STARTSECTION{"example6"}% %SEARCH{ "info.date >= d2n('2009-01-01') AND info.date <= d2n('2009-12-31')" type="query" limit="20" format=" * $percentICON{ \"$percentIF{ \"'$topic'/parent.name='UserDocumentationCategory'\" then=\"info\" else=\"gear\" }$percent\" }$percent [[$topic]]" }% %ENDSECTION{"example6"}%Click to execute
$percent
ensures that ICON is evaluated once for each search hit
$percent
token and will also be evaluated for each SEARCH hit. Additionally, the inside-out, left-to-right rule discussed earlier means that this IF expression will be evaluated before ICON.
$topic
is a child of UserDocumentationCategory, the info
icon is used; otherwise, gear
.
%STARTSECTION{"example7"}% <input type="text" id="search_field" size="32" /> %BUTTON{"Search" icon="find" id="search_button"}% <verbatim class="jqLoader" data-section="example7_results" id="result_loader"> %STARTSECTION{"example7_results"}% <div class="search_results"> %SEARCH{ "%URLPARAM{"q" encode="entity, quote"}%" decode="entity" type="keyword" nosearch="on" format="<div class='search_hit'> [[$web.$topic]] <div class='search_summary'>$summary(searchcontext)<!-- --></div> <div class='search_info'>$date, $wikiusername</div> </div>" }% </div> %ENDSECTION{"example7_results"}% </verbatim> <literal> <script> jQuery(function($) { function doSearch() { $("#result_loader").trigger("refresh", { params: { q: $("#search_field").val() } }); return false; }; $("#search_button").on("click", doSearch); $("#search_field").on("keydown", function(ev) { if (ev.keyCode == 13) { doSearch(); } }); }); </script> <style> .search_results em { color:red; } .search_hit { margin-bottom:1em; } .search_info a, .search_info { color:#64B000; } </style> </literal> %ENDSECTION{"example7"}%Search
<div class="search_results"> %SEARCH{ "%URLPARAM{"q" encode="entity, quote"}%" decode="entity" type="keyword" nosearch="on" format="<div class='search_hit'> [[$web.$topic]] <div class='search_summary'>$summary(searchcontext)<!-- --></div> <div class='search_info'>$date, $wikiusername</div> </div>" }% </div>